+ Reply to Thread
Results 1 to 10 of 28

Thread: Overwhelmed

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Overwhelmed

    Yup! That's right. Readings look good!

    You have a vinyl pool and your Calcium Hardness is SUPER low--which means if you want to use Cal-Hypo to chlorinate, you won't have to worry about it going too high for a long, long time.
    In fact, unless you use Cal-Hypo a lot, I wouldn't bother testing Calcium Hardness again until you close the pool.

    Do NOT add calcium just to add calcium or because the pool store guy tells you that you "need it". You don't. Low calcium is harmless in a vinyl pool.

    Otherwise, other than using the 25ml instead of the 10ml line to test chlorine levels, you look like you are doing fine.
    Carl

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Overwhelmed

    I agree that your numbers look good. My only comment is that if you find, once the heat of summer gets here, that you are having trouble keeping chlorine in the pool through a hot sunny day that you might want to bump your CYA up some. You may not need to but just keep it in mind if you start ending up with your chlorine level below the needed minimum (per the Best Guess Chlorine Chart) at day's end.

    Good job!

  3. #3
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Overwhelmed

    Looks like you're not so Overwhelmed any more. Congrats! Have fun!
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  4. #4
    Join Date
    Apr 2014
    Location
    Mobie, AL
    Age
    46
    Posts
    19

    Default Readings

    Yesterdays readings are:

    FC 5 ppm
    CC 1 ppm
    Alkalinity 7.6 pH
    CYA 42

    Please advise.

    Also, someone stated raising stabilizer. How do I raise that again?
    AG, 7,000 Gallons, K-1000 and K-2006 Test Kits

  5. #5
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Readings

    40 ppm CYA is OK.

    5 ppm FC is OK. 1 ppm CC is probably a testing error, unless you are 'smelling' the pool.

    You can raise CYA by dissolving cyanuric acid into the pool -- a sock works well for soft side pools -- or by using dichlor or trichlor, which add almost a ppm of CYA for every ppm of chlorine.

  6. #6
    Join Date
    Apr 2014
    Location
    Mobie, AL
    Age
    46
    Posts
    19

    Default Re: Overwhelmed

    So should I add just one "dose" of dichlor? or two? and should I ALWAYS do equal amounts of BORAX?
    AG, 7,000 Gallons, K-1000 and K-2006 Test Kits

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Overwhelmed

    You add dichlor to raise chlorine. It also raises CYA.

    You add borax to raise pH.

    You only do either, when you want to affect the particular pool factor. I usually try to size 'doses' to give them a reasonable amount to add at one time. But, that's assuming a 'test, dose, retest' approach, that corrects pool factors gradually.

  8. #8
    Join Date
    Apr 2014
    Location
    Mobie, AL
    Age
    46
    Posts
    19

    Thumbs up Re: Overwhelmed

    I am super appreciative for all of the help. You guys and gals are awesome!
    AG, 7,000 Gallons, K-1000 and K-2006 Test Kits

  9. #9
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Overwhelmed

    Glad things are working well for you . . .

+ Reply to Thread

Similar Threads

  1. Intex Owner 15' x 48" overwhelmed
    By ATC_NH in forum Pool Chemistry for Intex-type Pools
    Replies: 3
    Last Post: 07-13-2012, 04:49 PM
  2. Overwhelmed by all the pool chemistry
    By darylrue in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 03-31-2012, 02:05 PM
  3. New here. A bit overwhelmed.
    By Mwil3 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 20
    Last Post: 05-30-2010, 05:10 PM
  4. Overwhelmed with pool chemistry
    By muundance in forum Pool Chemicals & Pool Water Problems
    Replies: 7
    Last Post: 04-28-2006, 11:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts