Wanting to change wall mounted screen filter to a skimmer on Intex Ultra Frame pool.

[The Brabarian]

OK, Well thanks for the link. Maybe that will be a place to start.
I appreciate the timely response.

[Watermom]

You're welcome! Hopefully some others will chime in with some more thoughts for you about this.

[BigDave]

When I had my intex inflateable ring pool, I had an Intex skimmer that mounted (sort-of) to the inflateable ring. It required alot of fiddling as the ring would expand during the day with the sun on it. I think that on a frame pool, it would work better. The following link looks like an updated version of what I had Intex Krystal Clear Wall-Mounted Pool Surface Skimmer. If you buy it through the link the PoolForum gets some coin to keep the lights on.

I also had an above ground robotic cleaner that worked pretty well for cleaning the floor but didn't last very long. You could probably figure out a way to connect a hose to the skimmer's suction for vaccuuming.

[The Brabarian]

I went to several pool supply companies looking for something to attach, but the only things they had were such small lines that without some serious reduction fittings they would never work.

But again with this, the outflow would be severely restricted and that worries me as to how it could effect my sand filter pump.

Long story short, I purchased a separate small pump, similar to what Big Dave mentioned and with a few adaptions have made something that will fit under the deck and run separately as just a skimmer by itself.

Thank you guys for your ideas though.

[BigDave]

I'd love to see a picture of your solution.

[The Brabarian]

I'll post them soon. Just finished a good cleaning of the inside and will start filling it today.
Thanks again.

[PoolDoc]

Send the pics to poolforum@gmail.com, if you like. Include the thread number (23002)

. . . membership upgraded.