That's pretty much the NEC requirement for AG pools as I read it a couple years ago (without the pump bond). I'm still unsure about not including the pump housing in the bonding plan. But, if your electrician friend is betting his license on it ( he did sign the permit? ) then you should be OK - at least as far as the insurance goes. It is good that the bond wire is installed around the pool and bonded to the water.

The only un-bonded pools I've seen have been the Intex variety. Personally, when we had our donut, no one was allowed to touch the pool when it was connected to the electrical supply. Call me crazy but I wouldn't bet the lives of my family on the integrity of the insulation in the pump.

Just my 2 cents.