Slime behind Niche Light

[selectstar]

Several days now and the water has seemed to straighten itself out. It actually has a hint of bleach smell which is far removed from where it was and the cloudiness has dissipated.

This morning...
FC=7-8ppm on a half/half diluted test. It appears to be dropping, albeit, slowly. Using the instructions (multiply by 2), I think this puts me at about 14-16ppm
CC=7-8ppm (appears non existent)
PH=7.2, 7.3
TA=100
CYA still about 100. I still don't know how it got this high. My readings must have been incorrect at close last year.
Clarity on a 1(bad) - 10(perfect) is about 7-8

Going forward I plan to give more attention to the niche light and those hard to reach areas that have proven to be problematic.

Thank you for everyone who contributed their knowledge and insight to this problem. IMO, this forum is the single best resource out there.

[PoolDoc]

I'm curious how it's going, now.

Ben

[selectstar]

It's going well. I have all but completely converted over to BBB with SWG. So far so good.

The water seems cleaner and more polished than ever. I know my CYA is still high so I am keeping my chlorine a little higher than I normally would at about 7-8ppm.

I found that my ladder was also harboring some of the black mold/bacteria (or whatever it was) due to poor circulation. I have since drilled a couple small holes at the top and bottom of each rail with the thought that this may help circulate the water to the interior as people climb out of the pool.

Going forward, I will be more proactive with my light and remove it from time to time for cleaning. I've actually toyed with the idea of injecting straight bleach in the small circulation holes periodically to try and stay a step ahead this time.

Thanks for all the advice, that was the nastiest water/crud that I have ever encountered.

[PoolDoc]

I suspect that, if you can succeed in fully eradicating it, you won't experience problems going forward, due to your more consistent and educated approach to chlorination.