New 40k gallon Saltwater pool/jacuzzi owner

[Matt -- HB Cali]

One more quick question. I see that in order to use the newer Hayward cells (T-CELL-3 for instance) it requires a software revision.

<snip>

Product Note: New cells require software revision: Aqua Rite Pro 1.10, Aqua Rite 1.50

<snip>

How do I check my current software version? And if I need to upgrade, is this something I can do myself or would I have to pay my pool guy $1k for it?

Thanks,

-Matt

[PoolDoc]

That's a "call Hayward" sort of question: 908 355-7995 or 908-351-5400. (One of those should work.)

[JimK]

One more quick question. I see that in order to use the newer Hayward cells (T-CELL-3 for instance) it requires a software revision.

<snip>

Product Note: New cells require software revision: Aqua Rite Pro 1.10, Aqua Rite 1.50

<snip>

How do I check my current software version? And if I need to upgrade, is this something I can do myself or would I have to pay my pool guy $1k for it?

Thanks,

-Matt

On my Aqua Rite pressing the Diagnostic button repeatedly cycles through temp, salt level, etc, and firmware version (it will show "r1.xx).

Hope this helps.

The main board on my unit had to be replaced in 2009 and apparently came with the current firmware.