2 speed Super pump is noisy on LOW speed

[mas985]

If the springs are ok, then you might only need a little lube on the governor. I am not sure if you can get the parts but you might try contacting them here:

http://www.centuryelectricmotor.com/Contact-Us.aspx

Parts: http://www.centuryelectricmotor.com/...t.aspx?id=8644

A.O.Smith motors was bought out by Regal Beloit and they are now selling under the Century brand.

[PoolDoc]

@Mark: Can you point me to schematics on the motor? Pump, no problem. But I couldn't find any schematics on the switch / wiring plate / etc.

@Hopkiba: I was disappointed in the Hayward response -- not helpful; not engaged.

=============== merged post ==========================

@Hopkiba: one more thing -- could you take photos when you replace the spring? Thx.

[mas985]

I am not sure where they have this on the new web site if at all but you can download a service manual from my google drive here:

https://drive.google.com/file/d/0Bw8...it?usp=sharing


Other documentation can be found here:

http://www.centuryelectricmotor.com/...e-Library.aspx

[hopkiba]

Thanks for your continuing help. So far so good, still quiet. I will go to a local motor rebuild shop to get the spring and will post pictures.

[PoolDoc]

Thanks.