Hi all - new here, and I am having a pool problem.
We recently purchased a house with a pool, and we have no experience with them at all. So far I have been getting by with advice from friends/neighbors.
This pool has a built-in spa that in designed with a water fall down about 2.5 feet into the connected pool. When the pump in not running, the water slowly subsides from the spa into the pool. It hasn't been a big problem as the water in the spa comes right back up when the pump runs twice a day. Now, however, it is getting to the point where the plaster is exposed, and today it was down below the jets in the spa.
My pool equipment is all several years old, and it is all hayward. The pump is a Super II. I have read elsewhere that it might be a check valve, but I don't know where to look for this or what it would look like. It makes sense that it would be a check valve, so hoping I can locate it and replace it.
Any help in pointing me to the proper place would be appreciated. Thx.
Bookmarks