To drain or not to drain pool with high CYA?

[PoolDoc]

Add 1 - 2 gallons of bleach every evening, till full. If you detect the slightest bit of 'green' while filling, add 4 gallons. Begin running your pump and filter, as soon as you can prime the pump, but not till the bottom of the pool is covered in water. (You don't want a jet of water hitting the pool surface directly -- depending in your water, doing so can result in stains and/or erosion.)

Likewise, avoid having fresh fill water come into direct contact with the pool surface. If there's any reason to suspect metals (iron?) are present in the fill water, add a liquid stain / scale treatment as you fill -- do NOT over dose. Dose for the water present; not for the what will be present when the pool is full.

[stevemac213]

Ok thanks Ben. Do you mean add 1-2 gallons every evening while filling it up? Not sure how long it'll take to fill but I imagine it'll be a lot quicker than emptying, since I'll have 3 hoses going in....so may take only 1 or 2 nights.

Prime the pump....hmmm. Does that mean when the water gets above the skimmer level? Also, do I need to clean the filter and if so, when?

Sorry for dumb questions but I'm a newbee.

Thanks again.

[PoolDoc]

Yep, bleach every evening.

If you're new to pools, just start the pump when the pool's full . . . but if you've never started the pump from empty pipes before, you might see if someone can show you.

[stevemac213]

Ok, what about cleaning the filter....should that be done now, or after it's filled...or not at all?

Thanks.

[PoolDoc]

What type of filter do you have?

[stevemac213]

It is a Purex Triton Cartridge Filter CC320P. I cleaned it a few months ago...the cartridges were black.

Question...I put all my info in when I signed up but not sure where it went...any idea?

Thanks.

[PoolDoc]

You should clean your cartridges -- how-to here: Cleaning-your-Cartridge-Filter-without-Damaging-It!

No idea about the data.