What exactly is the "hub of a 7734"? How hard is that?
What exactly is the "hub of a 7734"? How hard is that?
In-ground gunite 16 x 30 13,000 gal. Full screen enclosure. 120 sq ft. Filter cartridge, 1-1/2 HP pump. Master Pools In-floor cleaner. Taylor K-2006.
It's just a euphemism.
rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10
I don't even know how you could measure a CYA of more than 100 unless you diluted your pool water 4:1 with distilled water and STILL got a measure of 100ppm. Nor how you could get it so high.
Carl
I'm in Gilbert, AZ and have been battling high CYA since I bought this house 2 seasons ago. I just started working on my pool this season and found out my CYA is now around 30, when I started it was over 100. How did you get the CYA reading of 500? If it was from a local pool store, don't put too much value into their test results. Get yourself a Taylor K-2006 kit and test it yourself. As far as high CYA, I just dealt with it and let it lower itself naturally, I had to keep my chlorine levels around 10ppm for the whole season and in the winter I just let the pool filter run but added no chemicals (surprisingly it stays pretty clean, just a little cloudy). I immediately switched to bleach and/or liquid chlorine, this will stop adding CYA too your already high levels as well.
PebbleTec | 25k Gallons | Purex Triton Whisperflo pump | Magnetek Century Centurion 1.5HP | Hayward Pro Series S311SX Sand Filter | Taylor K-2006 kit
Dubbed, you're responding to a post from last year. The OP hasn't been checking back in, so he's probably not paying any attention to this.
Bookmarks