There's little we can do to help you.
+ We do not support copper ion based systems, because they do not sanitize pool water.
+ Furthermore, if you mix BBB methods with a copper system, you are very likely to stain your pool, without necessarily gaining adequate sanitation.
With respect to your specific question -- you just need to aerate your pool, to achieve your target alkalinity. This page will give you further information: http://www.poolsolutions.com/gd/lowe...p-by-step.html
(NOTE to future readers: this is NOT an endorsement of the poster's alkalinity target, which is too low for most concrete pools.)
Bookmarks