Cloudy Water in Intex 16' pool

[PoolDoc]

OK, then.

Is there any green to the cloudiness? Or is it just gray?

If it's gray, using a clarifier may help, but ONLY if you have not used any OTHER clarifiers, flocculants, or metal treatments. Getting the Filbur or Unicel cartridges will also help. I'll post a link on a clarifier that I've seen good reports about. If you order the clarifier, do NOT exceed the recommended dosing.

If you are replacing the cartridges every two weeks, that's what's recommended. It will improve your filtration some, if you get the Filbur or Unicel cartridges, but it still won't be an instant clean-up.

Meanwhile, keep the pH between 7 and 8, and the chlorine in the dark yellow OTO range.

Good luck!



GLB Clear Blue


Also, you can get free 2-day shipping with Amazon Prime, which is currently available with a free trial. If you don't use Amazon much, just cancel it when you're done. If you do use Amazon, Prime is probably a good deal. I joined, myself, several years ago when I was late buying Christmas presents -- it saved my neck!
Amazon free 30-day trial

[laurah]

Hi PoolDoc,
Here is an update on my progress =)
Added 1/2 gal of bleach last night, water looks better today but still hazy. TC tested 5-10(dark yellow), pH 7.2, this am - was glad it held overnight. Still running pump/filter, rinsed filter again this am.
Planning to test again this evening & add another 1/2 gallon of bleach if still cloudy.
I may get the clarifier you suggested if not cystal clear in a couple days, thanks. I do use Amazon, but never signed up for prime may try that too =)

Here are my other questions:

1.) Should I use algaecide? If so is hth 3x concentrate ok?
2.) For a maintenence dose, if my CYA is at 50 I should keep my chlorine between 3-6, going by the chart,correct? Adjusting accordingly by the amount of stabilizer I have in my pool?

[laurah]

Oh, also with a CYA level of 50 should I stick with unstabilized chlorine until that level goes down?
THANKS A BUNCH!!!

[PoolDoc]

1. Don't use algaecides now. None are fully compatible with chlorine; only polyquat (www.poolsolutions.com/polyquat.html) is mostly compatible.

2. 50 ppm CYA is perfect.