I need some input please.
I realize that I did some things inncorrectly in setting up my pool FIRST, and THEN looking for sanitizing solutions.
I am in a Rural area, on a fixed income, so WalMart is my only option for pool supplys. I have purchased an Intex 15'X48" above ground pool.
It went approx 7 days in triple didgit heat, with NO CHEMICALS.
2 days ago, I went out and bought:
HTC Shock Treatment
HTC # in 1 Chlorinating Tablets
Pool Test Kit
I turned on the pump and Shocked the pool, waited 4 hours and put in one of the 3 in 1 tablets.
I kept the pump running all night.
Within 8 hours I saw a difference, and the next day it was clear as a bell.
I turned the pump off last night. Came out this morning and although the pool looked a "little" cloudy but not much. I then checked the Chemicals.
I have provided a link (below) to my Facebook page showing
a photo gallery of the Chemicals I purchased and a photo of today's test results.
It looks like the PH is OFF THE CHARTS and there's no Bromine.
I'm wondering if I can "shock" rthe water again (been 3 days)?
Supposedly with this Chemical you CAN'T "over-shock it".
The link is [unclear photo removed -- Admin]
Any advice/help you could give, (with the chemicals I bought) would really been appreciated.
Roger
Bookmarks