I just moved into a house in Phoenix Arizona with a pool and am learning how to take care of it, been reading a lot of info here on the site. I'm pretty sure I need to drain and refill but can't do it until the weather cools down. I'm wondering if there is anything I should adjust in the mean time. I have the K-2006 kit, and current levels are:

FC: 32.5
CC: < 0.5
Ph: 7.2
CYA: 400
TA: 130
Calcium Hardness: 750
Water temp: 93 F

Also, with the levels being so high on some of these tests, will it affect the accuracy of the other tests? For example, I read that high chlorine will affect the accuracy of the Ph test but I don't know how to compensate for it. The CYA result was obtained by diluting the pool water with distilled water 4:1 and then multiplying, not sure how accurate that is.

Thanks for any help!