Since you've got a K2006, go ahead and use bleach to take the chlorine to 10 - 15 ppm. A single gallon of 8.25% bleach should get you there.
Since you've got a K2006, go ahead and use bleach to take the chlorine to 10 - 15 ppm. A single gallon of 8.25% bleach should get you there.
PoolDoc / Ben
Thanks! I brought the chlorine up to ~12ppm this morning and this evening the pH is up around 8.0 (from 7.5). Is that normal?
I think the pool was looking better, but it's night now and I can't tell. Chlorine is down to around 8ppm--I'll bring it back up to 12-15 for the overnight.
18' round 7K gal Intex AG pool; tabs, hand fed granual; Game Sandpro 50 sand filter; Game Sandpro 50 pump (1/2 hp) pump; 24hrs; Taylor K2006; utility water; iPhone; PF:17
Yes, the pH rises when you add chlorine bleach or chlorinating liquid, but it will drop back down when the chlorine gets used/consumed. Maintain the higher chlorine level until the pool clears.
15.5'x32' rectangle 16K gal IG concrete pool; 12.5% chlorinating liquid by hand; Jandy CL340 cartridge filter; Pentair Intelliflo VF pump; 8hrs; Taylor K-2006 and TFTestkits TF-100; utility water; summer: automatic; winter: automatic; ; PF:7.5
Bookmarks