replacing hayward dial a flo vavle (jandy type valve?)

[PoolDoc]

It appears the SP0733 Dial-A-Flo is discontinued; other parts are available but I didn't see valve bodies. It looks like your valve is threaded?

You can use a Jandy valve like this one:

Jandy Space Saver 1-1/2 to 2-Inch Positive Seal Pool/Spa Valve, Gray

The valve can be oriented with any one of the ports as the discharge port. However it looks like you may need some 1.5" female thread adapters, plus a bit of 1.5" pipe, so you can connect the threaded ends of the hose clamped fittings.

[ethan169]

Thanks for your reply Ben,

Yeah the valve is threaded. I suppose the skimmer to valve attachment is threaded too. I'm not sure what I was thinking earlier.

I didnt realize that the jandy valve could be configured to have any of the ports as the discharge.

The description says 1-1/2" to 2 inch. Are one of the ports 2" or does it accept both? The piping that i am currently using is 1-1/2" i believe.

Thanks again!