For a start, I should explain that the K2006 can provide you with the information that makes it *possible* to have a clear, clean, enjoyable pool . . . but it doesn't guarantee any of those things.

+ Your pH, Alk, Calc, & CYA levels are all fine for an AG vinyl pool.

+ Your chlorine is too low for a pool with cloudy water from uncertain causes. Maintain at least 3 - 6 ppm, till things are better. At the first sign of slime (slippery-ness on the walls, hold the chlorine over 10 ppm. (Read the Best Guess page linked in my signature for more info.)

+ AG pools notoriously have over-sized pumps and under-sized filters. As a result, the pumps tend force dirt through sand or substandard cartridges. Ironically, in some cases this breaks the particles into even finer particles that are hard to filter with GOOD filters or cartridges.

If you have a sand filter, or a cartridge filter with an old cartridge OR an Asian-made cartridge, there's a high probability this is an important part of the problem. Tell us what filter, and what pump you have, and if it's a cartridge filter, what the history of the cartridge is.