Hi there, I have an intex ultra frame 22"x 52" round pool and a Krystal clear sand filter pump 14" & saltwater system( model cs 15110). The pool has been up for about 3 weeks. I followed the start up directions in the saltwater system manual, added 2.2 pounds cyanuric acid & 260 pounds of salt. My test strip results show that the chlorine levels are too low. Last week, I added 3 gallons of regular bleach to help raise that, but chlorine levels are still low. I'm running the SWCG for 10 hours every day.
My test strip results for this morning show...total hardness-100 ppm, total chlorine-1 ppm, free chlorine-1 ppm, ph-8.4, alkalinity-180ppm, stabilizer- 60 ppm.
Suggestions, please?