+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16

Thread: Unable to remove cloudy pool water in Intex pool

  1. #11
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Unable to remove cloudy pool water in Intex pool

    @stma: I've purchased stuff at eBay, successfully. But I've also had some unsuccessful purchases, and found the return process to be very difficult and not supported by eBay.

    So, I'd prefer to stick to the Amazon links I've got. The same seller is present on Amazon, at a few dollars more than you mentioned. But Amazon will get involved if there's a return problem.

    I had to think about this for awhile, because we do get a commission on Amazon sales, and I needed to think a bit, to make sure I wasn't pulling the link for purely selfish reasons. But I've never allowed links to even slightly dodgy sources - and eBay is sort of a 'Wild wild west' market -- some great deals, but at the cost of some high risk.

    Of course, if someone wants to search for the K2006, they can find sellers on eBay. That's fine with me, but it's on them, not on us.

  2. #12
    Join Date
    Jun 2013
    Location
    SE Texas
    Posts
    5

    Default Re: Unable to remove cloudy pool water in Intex pool

    Thanks for all the help guys.
    Bought some CYA and put 2lbs in gradually since 8am. When levels are up ill go to bleach.
    Kickin myself for wasted money on stuff I didn't need.. but, better late than never. I'll keep you posted on progress!

    Sam

  3. #13
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Unable to remove cloudy pool water in Intex pool

    Quote Originally Posted by RockTaco View Post
    Bought some CYA and put 2lbs in gradually since 8am. When levels are up ill go to bleach.
    Do NOT wait; you'll end up with a green pool that will cost far more than the bleach you are trying to save. Add a gallon of plain household bleach per 10,000 gallons of pool water each evening. Purchase and use a cheap local OTO/phenol red kit (yellow/red drops). Skip bleach doses if the chlorine level is dark yellow.


    Kickin myself for wasted money on stuff I didn't need.
    Don't. It's not like the pool industry promotes this site, or the 2 - 3 others that promote the BBB method!

  4. #14
    Join Date
    Jun 2013
    Location
    SE Texas
    Posts
    5

    Default Re: Unable to remove cloudy pool water in Intex pool

    Success!! I can see the bottom of the pool! Still has a light haze (no sparkle yet) but TONS better than it was.

    New, quality filter did wonders along with 2.5 lbs of CYA, 3/4 gal of bleach =
    5.0 chlorine, 7.2 ph, 170 alk, 50 cya.

    Chlorine is up and AK still high, but LOOKS a whole lot better and should be much easier to manage.

    Thanks for all the help!

  5. #15
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Unable to remove cloudy pool water in Intex pool

    You are welcome! Great to hear it is shaping up!

  6. #16
    Join Date
    May 2011
    Location
    Lake Mills, WI
    Posts
    15

    Default Re: Unable to remove cloudy pool water in Intex pool

    Quote Originally Posted by Watermom View Post
    Cords --- The CYA test only requires 7 oz. of the reagent plus 7 oz. of pool water. If you buy the K-2006C version of the kit, you get larger bottles of reagents --- 2 oz. vs.0.75 oz at a better price. But, you are correct, that buying some extra R-0013 is a good idea.
    Oops! I did the test this morning and realized my goof when I posted that. And my CYA was less than 30, no wonder I was going through so much bleach lately!
    -8200 gallon 20' x 4' (3.5' really) Intex Ultra Frame. Well water w/high alkalinity.
    -"A" filter cartridge, surface skimmer. I spray the A filter every 2 days when I check the chlorine. I only use bleach (3-6), muriatic acid (to knock down ph & alkalinity), and stabilizer (cya 50).

+ Reply to Thread

Similar Threads

  1. MY Intex pool is green and cloudy
    By reboot530 in forum Dealing with Algae & Slime
    Replies: 14
    Last Post: 08-24-2012, 12:30 PM
  2. Cloudy Intex pool, too
    By lorispaulding in forum Intex-type Pool Setup & Operations
    Replies: 1
    Last Post: 08-07-2012, 10:09 AM
  3. 12' Diameter INTEX Pool with very cloudy water
    By calalily1963 in forum Pool Chemistry for Intex-type Pools
    Replies: 5
    Last Post: 07-19-2012, 06:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts