Results 1 to 10 of 17

Thread: Intex filtration problems

Threaded View

  1. #8
    Join Date
    Jul 2012
    Location
    Mexico, Missouri
    Posts
    193

    Default Re: Required post

    Because I'm a cheap son-of-a-gun, and can't see buying a vacuum head for a 15' pool, I bought a 24' long pool vacuum hose and use it without an end on it.

    I did buy a universal pool hose adapter so I could use the
    Surface Intex Skimmer Small Strainer Hose B Adaptor
    to clean the dirt off the bottom of my pool.

    I brush the pool to stir up the fine particles, then a couple of hours later I vacuum what has settled back into the wrinkles in my liner.

    Hope this helps!
    Last edited by PoolDoc; 06-18-2013 at 01:44 PM. Reason: fix link
    15' round 4.8K gal Intex AG pool; Intex 633 pump with twin canisters (2500 gph main filtering); Unicel 5315 filter cartridges; Intex 637 pump w/o filter (1000 gph heater circulation); 4hrs; K-2006; utility water; PF:24

Similar Threads

  1. pool filtration
    By ladypoolfool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-14-2013, 03:43 PM
  2. Calciium problems in an Intex pool
    By justlane4 in forum Dealing with Alkalinity and Calcium
    Replies: 4
    Last Post: 06-08-2013, 01:32 PM
  3. Filtration problems / pump size
    By thedubb in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 05-29-2013, 06:33 PM
  4. Intex AG Blow up ring problems
    By edlentz in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 09-29-2012, 11:39 AM
  5. Contacting Intex Corp for parts or problems.
    By PoolDoc in forum Intex-type Pool Setup & Operations
    Replies: 0
    Last Post: 07-13-2012, 10:05 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts