I'm glad you were able to find an answer elsewhere, but it would be better if you'd been able to find a *correct* answer elsewhere.

Cavitation is the RESULT of flow restriction on the SUCTION side of a pump; it is not the CAUSE of a loss of flow. See the Wiki page: http://en.wikipedia.org/wiki/Cavitation

Cavitation is results when near vacuum pressures are created in the vicinity of the pump's impeller, and is NOT the same as air mixed with the water flow on the suction side of the pump.

Air in the suction lines ALWAYS is the result of a suction side leak. Possibilities range from "water level below swimmer" to "skimmer vortexing" (bathtub drain 'tornado' allowing air into lines) and to cracks in the suction lines or valves.

Helping folks with suction side leaks is not one of my priorities, but not just because we have a hard time keeping up. Rather, the problem is that suction side leaks tend to be hard to identify, even when a pool guy is AT the pump. Trying to identify them via forum posts, with no pictures or sounds (very important for suction leaks!), based on descriptions from pool owners struggling to distinguish the suction and pressure sides of their pump . . . tends to be disappointingly unsuccessful.

Just because we'd like to help, doesn't mean we've figured out how to do so in every case!