+ Reply to Thread
Results 1 to 4 of 4

Thread: Low, inconsistent pressure in return jets & almost no suction inside skimmer

Hybrid View

  1. #1
    Join Date
    Nov 2012
    Location
    Charleston, SC
    Posts
    2

    Default Re: Low, inconsistent pressure in return jets & almost no suction inside skimmer

    If I remember correctly, there were some leaves in the pump strainer basket, but nothing severe. The skimmer basket was packed though. Also, the first day or two it seemed like there was some suction in the skimmer, but now it seems like there is none at all.

    If the pump's impeller is clogged, is it possible to unclog it? If so, can you tell me how?

    ---------------------------------------------------------------------

    I don't recall the pump basket having very many leaves in it. However, I exposed the impeller today and it was not obstructed. There was a very small amount of debris in it, which I cleaned out. I reassembled the pump and fired it up... unfortunately the problem still exists. Any other suggestions? I appreciate any and all help!

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Low, inconsistent pressure in return jets & almost no suction inside skimmer

    You sort of have to work it in stages.

    1. Shut the pump off, open the pump basket, let everything drain and stabilize. Fill the pump basket and turn the pump on --JUST BRIEFLY! If the pump is operating correctly, and the filter and lines downstream are operating correctly, the pump basket should empty almost instantly.

    2. After checking the pump, if it and the gear downstream seems clear, you'll need to test the lines and valves UPSTREAM of the pump. But, you'll need to post pictures before we could begin to tell you how to do so. Use Picasa, Webshots, Flickr or whatever, to post.

+ Reply to Thread

Similar Threads

  1. Poor Skimmer Suction and Good Main drain suction
    By teachone in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-14-2012, 01:06 PM
  2. Replies: 10
    Last Post: 07-10-2011, 04:17 PM
  3. Can fiberglass from inside of sand filter return to pool?
    By CandyMoss in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 05-03-2008, 10:07 PM
  4. Oil slick looking surface inside skimmer
    By mneal in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 09-28-2006, 12:02 PM
  5. Sludge ring around inside of skimmer ???
    By pool newby in forum Pool Chemicals & Pool Water Problems
    Replies: 11
    Last Post: 06-17-2006, 12:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts