+ Reply to Thread
Results 1 to 9 of 9

Thread: Help with opening up a !0,100 gal AGP

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Help with opening up a !0,100 gal AGP

    Depends on what's in the "regular shock packages".

    You've got a problem, however. If you fully dissolved the 3# of stabilizer, you should now have a CYA level around 40 ppm. If you use much trichlor, your level will continue to climb.

    I'd recommend using plain 6% household bleach to shock - that will not add CYA. A 96oz jug of 6% bleach will add about 5 ppm of chlorine to your pool.

  2. #2
    Join Date
    Jul 2012
    Location
    Pennsylvania
    Posts
    7

    Default Re: Help with opening up a !0,100 gal AGP

    I did not put any stabilizer in yet because I was going to try to get the dichlor. I was just putting in 6% bleach so far. I went out and found some "4 in 1 shock plus" (made by aqua chem) and it states: active ingredient of Sodium dichloro-triazinetrione 58.2%, other ingredients 41.8%. A 24 pack box was similar in price as to what your recommendation was (I do not have a Sam's near me). What do you think of using that? The label also states: creates sparkling water, for all pool surfaces, reduces chlorine odor, does not increase ph. Is this similar to what you recommended?
    15x24 oval 8.1K* gal AG vinyl pool; Skimmer Tabs; Hayward Perflex EC 40 DE filter; Hayward Power-Flo Matrix - 1 HP 1 speed pump; hrs; ; Taylor K2006 C; utility water; summer: none; winter: vinyl / water bags; PF:14.8

  3. #3
    Join Date
    Jul 2012
    Location
    Pennsylvania
    Posts
    7

    Default Re: Help with opening up a !0,100 gal AGP

    Well, I just called the manufacturer and have bad news. I asked if the product has stabilizer and was told that it does, in fact contain it. That was good, but I asked about the 41.8% of "other ingredients" and was told that there are clarifiers, filter aids, and buffers....all things that you do not recommend. Unless you tell me otherwise, I am going to return this and then use the stabilizer that I already purchased (product of china...ugh!!!)...along with doses of 6% bleach. How does that sound?
    15x24 oval 8.1K* gal AG vinyl pool; Skimmer Tabs; Hayward Perflex EC 40 DE filter; Hayward Power-Flo Matrix - 1 HP 1 speed pump; hrs; ; Taylor K2006 C; utility water; summer: none; winter: vinyl / water bags; PF:14.8

  4. #4
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Help with opening up a !0,100 gal AGP

    Yeah, that's why Pooldoc recommends the Sam's dichlor--we know exactly what's in it and what it will do to your pool water. We can't say the same about the generic clarifiers, filter aids, buffers, etc--who knows what all that is, and what it'll do?

    I would return it, and go with your plan of adding straight CYA along withe bleach for the chlorine. By the way, when you get the 3" tabs, make sure you check the ingredient label for copper. Many chem manufacturers are adding copper to the pucks so they can re-label them as "dual acting" and raise the prices, but you don't want copper in your water because that's what stains things green (hair, nails, pool liners, etc.). Also, keep in mind that even if they don't contain copper, they DO contain CYA, so keep a really close eye on your CYA levels if you decide to use them. In fact, if you plan to use them, you might want to only add 1/2 the dose of granular CYA and just allow the puck use to raise the CYA the rest of the way.

  5. #5
    Join Date
    Jul 2012
    Location
    Pennsylvania
    Posts
    7

    Default Re: Help with opening up a !0,100 gal AGP

    Ok, it is CYA and 6% for me, at present. I will return everything else. I will look at the label on the bucket of pucks when it arrives...I may just return that as well. The good news is that the pool is up and running!
    15x24 oval 8.1K* gal AG vinyl pool; Skimmer Tabs; Hayward Perflex EC 40 DE filter; Hayward Power-Flo Matrix - 1 HP 1 speed pump; hrs; ; Taylor K2006 C; utility water; summer: none; winter: vinyl / water bags; PF:14.8

  6. #6
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Help with opening up a !0,100 gal AGP

    Quote Originally Posted by yardbird View Post
    The good news is that the pool is up and running!
    ......and that's the goal!! Good job!!
    Last edited by PoolDoc; 08-29-2012 at 02:19 PM. Reason: fix quote code

+ Reply to Thread

Similar Threads

  1. CYA at opening
    By PBLsQuad450 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-16-2011, 08:48 PM
  2. Will I need vac for opening?
    By poolbee in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 04-21-2007, 01:04 PM
  3. Low pH upon opening
    By kacy in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-11-2006, 09:14 AM
  4. Opening Day
    By TwistyKat in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 05-06-2006, 07:46 AM
  5. When to let Cl come down after opening
    By Davenj in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 9
    Last Post: 04-19-2006, 01:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts