question on pool deck

[cybernation]

hello all i have a heaving pool deck and i'm wondering what other people have done to correct this issue. I have a vinyl pool and concrete around the pool.

I've read about mudjacking or slabjacking but i'm in an area where i cannot find somebody to perform these items.
I'm curious if anybody else has had this issue?

I'll post up some pics later tonight.. but i'm not sure if i have permissions since i'm new here.

Thanks in advance!
and Hello!

[PoolDoc]

You can post pictures, with Photobucket, Webshot, Flickr or Picasa, but nobody will see them till they've been checked.

HOWEVER, if nobody in your area does "hydro-jacking" (what it's called here) . . . it's kinda a moot point. I don't think you'd want to pay travel rates for a company out of Toronto, much less Atlanta, Georgia.

[PoolDoc]

presumably, you meant 75,000 liters? regardless, from your dimensions, it's 15,000 gallons or 57,000 liters.

[cybernation]

I must have made a mistake in my measurements.. It is indeed 75000 liters verified by pool store

The issue with the cracks in the concrete is the coping has snapped off and there's a 1" gap between coping and concrete. I thought about putting concrete in the gap but I'm not sure of that's a wise idea.

Ive also thought about taking out the whole piece of concrete and putting a new one in. I'm not sure on the difficulty level of this solution. (have a bad back)

[PoolDoc]

Pool store 'verified' volume is almost always high.

[cybernation]

Yeah I know the pool store information can be highly inaccurate but I've kinda verified the amount due to the rise of tc and decrease of ph when adding a specific amount of chlorine / muriatic acid.

Thanks though!