Thanks so much for this site. I have tripled my very limited knowledge of pools and pool care in the several hours I've been reading. I have a 24x52 Intex Round 12481 Gal Sand Filter Pump CS20110 Saltwater System.

In the 7 day plan you do not mention adding Cyanuric Acid if using bleach and not dichlor. Is this because your recipe calls for enough bleach to keep the FC level up despite the UV rays breaking it down?

If dichlor were used instead of bleach would it still be 2 cups per dose with the same dosage schedule?

Also should I be running the pump with the salt water system on or should I wait until pool is stabilized to even turn on the SWCG?

Sorry to bombard you with so many questions at one. Again thanks for donating your time to answer people's questions.

Vinny