+ Reply to Thread
Results 1 to 10 of 18

Thread: Nitrates in pool

Hybrid View

  1. #1
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Nitrates in pool

    Quote Originally Posted by newsaltwaterpool View Post
    Yes, I predissolved the shock and dropped the ph.

    The dust seems to have cleared now but the pool is still cloudy. I just got the Taylor K-2006 test kit and here are my results:
    FC - 3 ppm
    CC - 0.5 ppm
    pH - 7.6
    TA - 160
    CH - 380
    CYA - <30
    salt - 3100 (3.1)
    OK, as I suspected, your TA and CH were much higher than originally reported by Leslie's testing. No big surprise here, which is why we stress testing your own water. Keep the pump running a the pool will clear soon. Your TA is still high for a salt pool but that can be dealt with later.
    Right now you need to get some CYA in there ASAP. That is why you have not been holding chlorine. Period! Also, you have some CC left after the shocking so there was probably an algae bloom on the verge. I think I know where Ben is going with the dichlor question. The fastest way to get CYA in the water is to shock with dichlor since it is so fast dissolving and it adds .9 ppm CYA for every 10 ppm FC added. It wont' be enough by any means but it will be a start.
    Retired pool store and commercial pool maintenance guy.

  2. #2
    Join Date
    Jul 2012
    Location
    Pennsylvania
    Posts
    8

    Default Re: Nitrates in pool

    Do I need to do anything about the cc reading? What do you recommend using to raise CYA since I don't have dichlor?
    24'x44' free-form 33K gal IG pool; SWCG; Jandy 60 sq ft DE filter; Jandy 2HP pump; 12hrs; drops or water taken to Leslies pool store for testing; pool water delivered via truck; net-dev; PF:3.6

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Nitrates in pool

    You need to purchase some plain stabilizer -- cyanuric acid. That is still usually sold unblended or diluted, but we are beginning to see problems there, as well, so pay attention to the label when you buy.

    To get a 60 ppm increase in stabilizer, you need 15 lbs.
    Here are links from Amazon:
    Kem-Tek Stabilizer 4lbs - $4/lb - Aug 2012
    Nava Stabilizer 4lbs - $3.70/lb - Aug 2012
    Nava Stabilizer 8lbs - $4/lb - Aug 2012
    And, Walmart links (buy locally, but you can check stock online):
    Aqua Chem Stabilizer, 3lbs - Caution: price not listed.
    HTH Stabilizer and Conditioner
    - listed at $16/lb!
    Ironically, it's actually cheaper to buy dichlor, which is effectively 55% chlorine and 50% stabilizer (no, not a misprint -- a chemical oddity I'm not going to explain here) when you consider the value of both the chlorine and the stabilizer. And of course dichlor is much easier to use than the very slow to dissolve pure cyanuric acid.
    24 lbs PoolBrand bagged shock @ Sams Club - ~$2.50lb - Aug 2012
    Kem-Tek Dichlor 22 lbs @ Amazon - $3/lb - Aug 2012

+ Reply to Thread

Similar Threads

  1. Advice Needed - High CYA, High Nitrates, and Lots of Algae
    By capshockeyfan in forum Pool Chemicals & Pool Water Problems
    Replies: 19
    Last Post: 07-03-2012, 04:47 PM
  2. Nitrates
    By VIIthson in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 06-16-2011, 06:20 AM
  3. high level of nitrates
    By alanleafgobbler in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 06-07-2011, 09:32 PM
  4. At what level are nitrates too high?
    By smallpooldad in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 09-27-2006, 08:57 PM
  5. Nitrates, Phosphates, and TDS ??
    By mrmrk49 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 04-22-2006, 09:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts