Results 1 to 8 of 8

Thread: AquaLogic lightning problem

Threaded View

  1. #4
    Join Date
    Jul 2012
    Location
    Clearwater, FL - USA
    Posts
    10

    Default Re: AquaLogic lightning problem

    Thanks for your help!

    So, I checked the wiring.

    The pool pump, the gas heater, the pool light transformer case and the control unit (Aqua Rite) all have their own grounding through a ground wire that goes from the metal case. Unfortunately I can only see the ground wires go into gray pipes. Pavers were put in later on. But everything was installed by a professional pool company and inspected.

    The house has a surge protector installed by a professional electrician. I had an additional one installed on the pool control. All electrical wiring goes from the main control to the other devices like pool pump, heater etc. Everything uses the green “ground” wire in the electrical cable.
    Last edited by STEPHAN; 07-23-2012 at 12:22 PM. Reason: Typo

Similar Threads

  1. hayward colorlogic underwater lightning not working
    By sangweb in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-08-2012, 03:55 PM
  2. Aqualogic or Aquarite
    By gogators in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 04-26-2011, 07:58 PM
  3. aqualogic pcb problem
    By INLANDSMOG in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 10-12-2007, 04:24 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts