Do you have your filter on a timer?

[drband]

Drband,

What did you have to do to convert you pump to a 2 speed? Just change out the motor?

Just changed out the motor. The impeller works just fine. Be sure to change all the seals if you do this! There are a couple of ways to wire this though. I opted for a motor mounted toggle switch for hi/off/low, since I primarily run on low except for vacuuming. You can wire it for an external 2-speed controller (expensive) or for an external switch (I believe it's called a single-pole double-throw switch) that works like the motor switch. You can still use an intermatic timer with that type of switch. Good luck.

[392papa]

Thanks, I'll get to work on it