+ Reply to Thread
Results 1 to 10 of 25

Thread: New member

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: New member

    I just want to congratulate you on doing your homework and taking control of your own pool. It makes life SO much easier when you don't have to just buy stuff from the store because they tell you you need it, without understanding why!!

    Good job!

    Janet

  2. #2
    Join Date
    Jul 2012
    Location
    Kansas
    Posts
    33

    Default Re: New member

    Thanks for all of the advice... Had my PH creep up above 7.8... not quite to the 8.4 on my test kit, but somewhere in between the 7.8 and 8.4. Added about 3 oz of dissolved PH Minus that we had on hand yesterday, and today the chlorine has held steady at 3 and the PH was back to about a 7.6. I'm guessing it's due to high aeration, as our kids plus the neighborhood kids have spent at least 4-6 hours a day splashing around in the pool. And the pump return into the pool really ripples the water since we don't have the pool filled to capacity. (And rain two nights in a row)

    Anyway... I pulled out all the chemicals we've purchased/been given over the years and was curious if any of the following are worth keeping around?

    * HTH PH Minus (I understand Muratic Acid is the chem of choice, but we already had this on hand)

    * HTH Dual Action 1" chlorinating tablets (active ingred. trichloro-s-triazinetrione 93.5% and copper sulfate pentahydrate 1.5%... avail chlorine 84%)
    * SpaGuard PH Decreaser (sodium bisulfate 93.2%)

    And the jug of "HTH Algaeguard" is definitely getting tossed.

    How do you dispose of unwanted pool chemicals? Are they safe to dump, or best taken to the hazardous waste facility?

    Thanks!

    Intex 16'x48" UltraFrame, approx 5000 gal

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New member

    The PH Minus and the PH decreaser are both just dry acid and should be fine to use unless they list some other unwanted ingredient on the label. If it is just sodium bisulfate, that's ok. Do NOT use the chlorinating tabs since they have copper in them. You do NOT want copper in your pool. And you're right. Do NOT use the HTH Algaeguard.

    I'm not sure of the best way to dispose of the unwanted stuff. Ben will have a better idea. I'll ask him.

  4. #4
    Join Date
    Jul 2012
    Location
    Kansas
    Posts
    33

    Default Re: New member

    Thank you! You are all so helpful

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New member

    You are very welcome!

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: New member

    Disposing of them might be tricky. Lemme ask some questions:

    1. Are you going to leave the pool up for winter, or take it down?
    2. Are you on a sewer or a septic tank?
    3. Do you have any sidewalks or concrete or roofing that has algae you'd like to remove?

  7. #7
    Join Date
    Jul 2012
    Location
    Kansas
    Posts
    33

    Default Re: New member

    1) take it down (we are routinely below 32degrees, even gets as cold at -17 here, and not sure that's a good idea to leave an Intex pool up in those conditions)

    2) city sewer (and a storm drain on the property - we were told last year it was safe to empty our pool into the storm drain as long as we let the chlorine drop to 0 before hand)

    3) nope, sure don't. have a brother in law with a big algae problem on his waterfall/koi pond, but I dont' think pool chemicals are safe for those expensive fish! lol)

    thanks!

  8. #8
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: New member

    OK.

    1. Keep the sodium bisulfate to use in your pool.

    2. I can't tell you what to do with the algaecide. What *I* would do, if I was on a city sewer, and had that stuff, is flush it down the toilet a cup at a time. But, it might be illegal for me to tell you to do that, so I can't suggest that for you.

    3. Tabs are harder. If no one in your household has blonde or gray hair, I would use them up, slowly, along with other forms of chlorine. Do NOT put them in the garbage. Trichlor can make big bangs, when mixed with various forms of garbage.

  9. #9
    Join Date
    Jul 2012
    Location
    Kansas
    Posts
    33

    Default Re: New member

    Thanks!

    Seeing as how 6 out of 7 of us are blondes, I'll probably not put them in the pool Perhaps I'll just post them on the freecycle group and pass them along to someone who might be able to use them.

  10. #10
    Join Date
    Jul 2012
    Location
    Kansas
    Posts
    33

    Default Re: New member

    Had a friend give us their pool "left overs" extra pumps, tubing and such... plus a couple of bottles of chemicals:

    * Leslie's Ultra Bright (from what I've read I probably don't need this one either)
    * Aqua Chem Filter Cleaner (bottle doesn't list ingredients, this is what I could find online: )
    Dipropylene glycol monomethyl ether 6%
    Sodium Hydroxide 8%
    nonylphenol ethoxylated phosphate ether 4%
    Benzensulfonic acid, dodecyl(sulfophenoxy), diammonium salt (DDBSA) %
    would love to know if this filter cleaner is safe to use on my cartridge filters (right now I just have the Intex ones)

    Thanks!!

+ Reply to Thread

Similar Threads

  1. New Member: Please Help
    By freetime in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 06-02-2013, 06:18 PM
  2. New Member-CYA
    By 392papa in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-14-2012, 10:43 PM
  3. New Member
    By amyjtaylor in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-22-2012, 03:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts