Go ahead and work on lowering the pH and alk as suggested in the previous posts. Using dichlor or trichlor are both good choices for you right now as it will do two things you need to do: add CYA and lower pH. Once your CYA gets to 50 or so, you'll want to stop using either and switch to bleach. (Don't test CYA too often so you won't run out of testing reagent.) I also would suggest NOT using cal-hypo at any point since your calcium hardness reading is so high.

Go ahead and post your overnight test results and we'll have a look.

(By the way, your new post was combined into your old thread so we can keep all your info in one place.)