Hi Ben,
Pool *looks* much the same - opaque green. Can still see about 1 (murky) foot into it.
I have been kind of letting it run at a higher back pressure that I normally would in the hope it will filter more junk out. (Also, being on a well, I can't afford to let too much water go to waste).
Back pressure on the filter rises from 11psi to approx 20-25psi and backwashing twice per day approx puts it back to 11psi. Sand in the filter is relatively new - used one season.
I pulled out a fair amount of leaf debris in the last couple of days, probably not *too* much left in there now, but reality is there is probably still a fair amount of oganic goo in there.
My pump pulls from two places - 1 skimmer and the main drain - originally I had it pulling from the skimmer only, but after a few days I set the valve so it mostly pulls from the skimmer, but some from the drain too. Initially I was afraid the main drain would block with leaves, but that doesn't appear to be the case.
I guess its a case of keeping on keeping on...
Cheers,
Malcolm.
Bookmarks