Installing new pump and filter

[shynshort]

Per my installer's instructions, I am returning the Tristar (issues w/going from 2" openings of pump to 1.5" of multiport and pool piping, also lid hard to open, rapid gasket failure in his experience).

So now my conundrum is do I keep original pump housing, step the motor down from 1.5 to 1 hp (or .75?) and replace the impeller and shaft seals or buy a whole new 1 (or .75) hp pump?

I appreciate anyone's input

Shynshort (who always over analyzes decisions ;-)

[mas985]

Given the age of the housing, I would be more inclined to get a new pump. But this time, I would strongly recommend a two speed.

Since you have two skimmers and a main drain, you might be better off with a 1 HP Superflo. Plus, it is a 230v pump which I suspect is the same as your old pump (?). That way you won't have change the wiring as well. But double check your current pump voltage setup.