White gritty scale

[Wapak]

Ok I tested again this morning, just my chlorine and ph.

Ph was high, 8.4

Chlorine was orange, I did shock last night.

Noticed tho that some very dark almost black spots on the deep end floor that wouldnt brush off yesterday are now gone this morning, finally the water especially in deep end is getting really clear.

I added a small dose of acid (less than a quart) since yesterday as soon as my chlorine went down, ph holds @ 6.8. Is that enough to add or would you advise a little more?

I plan on vacuuming, brushing andre-testing midday.

Also, my T A is turning from green to yellow instead of green to red. So I googled that and it looks like that is due to high chlorine. I will recheck my T A again at mid day.

[Wapak]

Just a quick update here at midday:

Chlorine is now a very dark yellow (was orange this morning)
ph is now at 7.8
I did not add anything now.
The T A test is still turning yellow so I cant provide a number on that yet.

I didnt have time to vacuum, but I did brush. Definitely some is coming off! As I brushed most of it seemed to settle at bottom, hard to tell how much.

I will vacuum this evening. I have been vacuuming so far just to waste, I haven't tried sending this stuff into my filter.

If you have any advice or if I should change what I am doing please just let me know.

I didnt do it now but this evening I will do a hardness test and provide that number.

All in all your instructions are working fantastically!. I will do my best to follow exact.

Thanks again

[PoolDoc]

+ Unless you still have live algae, or unless your CYA > 100 ppm, you don't need chlorine that is that high.

+ I don't remember, and haven't checked, your prior test results.

+ These videos apply, mostly, to the HTH 6-way => http://pool9.net/tk-guide/ http://pool9.net/tk-interfere/ The TA video, in the 2nd set, explains how to test TA when chlorine is high.

[Wapak]

Ok PoolDoc, here are my current test results I just took:

Chlorine. Close to 10just strong yellow now, no orange
T A: 160- I was able to read, it did not turn yellow as it did this morning. It also was at 180 yesterday when I started aerating.
PH: 7.5 (it was 8 earlier today)

I was going to add more acid to again lower ph-do you have any advice on amount? Do to this problem Im not exactly sure how much acid I should be adding??

Also, I have heavier build up along my deep end seams, its darker in color, I am just wondering if some of that is algae or just a thick pile of the scale? Some of it did go with brushing and vacuuming?

A pile of this stuff has been coming out my waste hose and filter basket holder-enough to fill a spoon! If you want me to send a picture got a great sample now I could get a pic of!!

[PoolDoc]

+ Use whatever doses you have before, but decrease them gradually. If you haven't been adding any particular amount, I'd start with 1/2 gallon of muriatic acid. If you find a dose takes you too low, reduce the dose.

+ Brush lightly those areas you think might be algae, but don't scrub.

+ Please send pictures to poolforum@gmail.com

[Watermom]

When you send the pics, include the thread number (16457) in your email.

[Wapak]

Still brushing off some, I can see its really brushing off in some spots where the coating was not as concentrated.

T A is most certainly coming down, its at 120-130 now.
ph holding at 6.8
Chlorine down to 1.-2.

Kids want to swim tomorrow, would you think its ok to let them in there for awhile? Didnt know if thats a good idea with the adjusting im doing?

Thanks again,

[Pappy]

The slower action in the deep end may be due to lower circulation and/or lower temperature. You might try hooking your vac head up and leaving it down in the deep end for an hour or 4 to stimulate circulation. See if you can tell a difference in the immediate area of the vac and other areas.

[Wapak]

Thank you Pappy, I will try placing the vac in the the deep end for a bit.