No suggestions -- it sounds like you are doing exactly what you need, and getting the results you were seeking.
Just don't get impatient, and start scrubbing the liner, or lower the pH too far -- and I think it will be fine.
Re: White gritty scale
No suggestions -- it sounds like you are doing exactly what you need, and getting the results you were seeking.
Just don't get impatient, and start scrubbing the liner, or lower the pH too far -- and I think it will be fine.
PoolDoc / Ben
Re: White gritty scale
The slower action in the deep end may be due to lower circulation and/or lower temperature. You might try hooking your vac head up and leaving it down in the deep end for an hour or 4 to stimulate circulation. See if you can tell a difference in the immediate area of the vac and other areas.
Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27
Re: White gritty scale
Thank you Pappy, I will try placing the vac in the the deep end for a bit.
16'x36' rectangle 21K gal IG vinyl pool; Trichlor feeder, & hand dispense; Fox pools sand filter; A O Smith, Century, 3/4 horse pump; hrs; HTH 6 way test kit, drops; well; PF:5.7
Posting Permissions
Reply With Quote
Bookmarks