+ Reply to Thread
Results 1 to 10 of 15

Thread: To shock or not to shock

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: To shock or not to shock

    We call them 'guess-strips', for a reason. (Actually, my experience with pool test strips has made me nervous about the fact that similar strips are used medically. It makes me wonder how often they are validated!)

    You need some CYA. If you have access to a Sams Club, check and see if they sell "PoolBrand" dichlor shock in a 24 x 1lb box. Most do; and at a very good price. The bagged shock in that brand is undiluted and unblended (good!) -- each bag will add about 4 ppm of chlorine to your pool, but also about 3 ppm of CYA. By the time you've used 2/3 of the box to chlorinate, you'll also have a good CYA residual.

    If you can't get it at Sams, you'll probably need to order online. Walmart, Costco, Kmart and most pool stores are selling a blended mess of dichlor and other goop. Lowes and HomeDepot vary by location, but you'd have to be an expert label reader to get the right stuff IF they have it. This product from Amazon is also unblended dichlor:
    Kem-Tek Dichlor 22 lbs

  2. #2
    Join Date
    May 2012
    Location
    WA
    Posts
    38

    Default Re: To shock or not to shock

    Thanks pool doc. My mom has a membership to Sams, and it's an hour away, so that might be the way.
    We do have a bottle of HTH stabilizer HTH at 96%. I'm assuming the other 4% is the goop you are talking about and this other stuff is more pure shock, correct?

    We will look into Sams or order online on Amazon. Thanks for the link. That helps a lot.

    Oh, as for the test strips at a hospital. Most are used for baseline and anything untoward is sent to the lab. At most hospitals I have worked at anyway.
    doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: To shock or not to shock

    Stabilizer that is 96% cyanuric acid is fine to use; normal production cyanuric has, I think, up to 5% impurities and inerts present.

  4. #4
    Join Date
    May 2012
    Location
    WA
    Posts
    38

    Default Re: To shock or not to shock

    Good to know. Thank you!
    doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.

  5. #5
    Join Date
    May 2012
    Location
    WA
    Posts
    38

    Default Re: To shock or not to shock

    UPATE: After our shocking the pool and adding CYA, we saw our CYA actually go up to 45. That was 2 1/2 lbs to the skimmer. That 2 days ago.

    We tested today (pool still covered with solar cover with rainy cool weather) and the numbers are as follows:

    FC 10 with the smaller volume test or 8.8 with larger. (why the difference?)Did my husband mess up?
    CC 2
    TA 80
    CY 45 ish..
    PH 7.2

    (we need to get a refill for the Taylor CYA test)

    Why did the CC go so high after shocking and adding stabilizer? Is this normal? The weather will be nice this Sunday, so we are hoping to swim. Husband says the pool does have a stronger chlorine smell this morning.

    thanks.
    doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: To shock or not to shock

    Quote Originally Posted by tokmom View Post
    Why did the CC go so high after shocking and adding stabilizer? Is this normal? The weather will be nice this Sunday, so we are hoping to swim. Husband says the pool does have a stronger chlorine smell this morning.
    When you cover a pool, CC's and CC precursors -- pool goo -- can't escape. Pool goo (it's a technical term here ) consists of bad pool chemicals, sweat, pee, suntan lotion PLUS whatever else gets in the pool and reacts with chlorine. Sunlight, chlorine, and aeration get rid of pool goo. Lose the sunlight, and cover the pool with a vapor-tight cover, and Voila', you have an indoor-chemistry pool. Indoor-chemistry pools have problems with goo.

    So, while I don't know exactly where YOUR particular CC's are coming from, they aren't unexpected.

    Does that help?

  7. #7
    Join Date
    May 2012
    Location
    WA
    Posts
    38

    Default Re: To shock or not to shock

    Ok, I wondered if the pool being covered for a good couple of weeks had anything to do with it. The sun (GASP!) has decided to make an appearance today. Maybe we will take off the cover and let it air out.
    Should we see if the CC drifts down on it's own in the next few days?

    I like the word Goo. At least I understand it, lol.
    doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.

+ Reply to Thread

Similar Threads

  1. Newbie: To shock or not to shock... That is the question
    By KaseyNewman in forum Using Chlorine and Chlorinating Chemicals
    Replies: 10
    Last Post: 06-04-2011, 03:50 PM
  2. To shock or not to shock??
    By 94ukgrad in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 07-20-2010, 09:42 PM
  3. how much shock is too much?
    By can-opener in forum Dealing with Algae & Slime
    Replies: 13
    Last Post: 08-15-2006, 07:26 AM
  4. Shock and SWG
    By OffTheDeepEnd in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 22
    Last Post: 07-06-2006, 08:46 PM
  5. To Shock or not to Shock
    By sartail in forum Using Chlorine and Chlorinating Chemicals
    Replies: 2
    Last Post: 05-26-2006, 12:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts