First start with K-2006
		
		
				
					
					
				
				
		
			
				
					Hi folks--
Well my kit came and I'm opening the pool. Water was nice and clear with some sediment on the bottom.
I started with 2 lb. of dichlor shock powder, and got 8 FC w/.2 CC (almost non-existent). 
PH was very low <7, and took 12 drops of base test to raise it to about 7.4. 
TA was 20, so I added about 9lbs Arm & Hammer and. Brought it up to about 90. 
CYA  was 30, and then up to 40 the next day. 
I've added Borax for the PH, but haven't retested since I applied it. 
Am I on the right track?
--Thanks
				
			 
			
		 
			
                        	
		         
			
			above-ground 15'x30'x3.5' oval  --  Hayward 1.5hp Power-flo matrix, Vari-Flo XL -- Swim Pro 3.2 sft sand filter, 250# of sand
			
			
		 
	
Bookmarks