Quote Originally Posted by PoolDoc View Post
Not sure why you'd do anything to either the calcium OR the alkalinity. (Don't pay much attention to the Taylor booklet: it's the WORST thing about that kit!)

Your stabilizer is OK. If you want to run trichlor tabs in a floater, it's great.
I was using Pool Calculator as a guide.. and according to that those numbers are low so I thought they would have to come up a bit. I guess the alkalinity is ok, but the calcium hardness looks like it should come up. But believe me, I'm fine leaving those where they are if I can

I still have most of that 5lb jug of the namco stabilizer, so Ill just use some more of that to bump it up another 10 maybe.