OK.
You've got FC> 10 ppm; pH=7.2, & CYA = 0
And, you've added 7lbs of calcium hypochlorite to a 13K gallon pool, so your chlorine is too high for the alkalinity and calcium tests -- till you get the K2006, and can adjust for that.
It's going to take a week or more to filter the algae out. If you get a clarifier and do NOT overdose, it *may* go faster. Make sure you brush the pool completely, to expose any layers or piles of algae while the chlorine is still high.
You'll need to add some stabilizer, but wait till you've brushed the pool. You can add stabilizer EITHER by putting ~4lbs in a sock, in front of the return OR by using (over time!) about 10lbs of dichlor. Do NOT put the stabilizer in the skimmer -- you'll probably have to backwash before the stabilizer dissolves.
Bookmarks