Here is the low down:
Inground 47,315 gallon pool, fresh water, Triton sand filter with a Hayward 2.5 H pump. flow rate is great at 120
FC - 4
CC - 1
TC - 5
Ph - 7.6
TA - 110
CYA - 0
CH - 210
Sat index - 0.1
We had an aglae bloom last week, used algaecide followed up with a polymer solution from our local pool store to clump the algae. We've been brushing, vacuuming since then but still have light blue pool water that remains cloudy. We can't see the main drain and can't open. I read that cloudy water can result from adding calcium chloride and sodium bicarbonate at the same time (not sure if I did this). Any ideas? Thanks