New Member, yucky pool

[PoolDoc]

1. You're alkalinity causes the pH to rise over time. This page explains what's going on:
http://www.poolsolutions.com/gd/lowe...p-by-step.html

2. I'd recommend starting with a 1/8 - 1/4 gallon dose -- don't measure, guess. That may be too much, but with your TA as high as it is, it will just climb back up. (The good thing about muriatic is that it's really, really unpleasant long before it's really dangerous -- but still, if you don't try to pour and measure, you won't get a snoot-ful)

3. Do continue with 1/4 bottle of bleach each evening. If your pool's FC gets too high, skip the next dose.

[Old Bat]

Hello again. I must say that so far this has been the easiest pool year for us, ever. Thanks for all your help.

I see there is now a sticky thread on the lime softening. That is what I came in here for. Our ph keeps creeping up and we are getting calcium scaling starting all over the walls. I will print out the directions. Looks rather complicated, so I will need to get more test chems before I do this.

But other than the hardness problem, we have not had algae, even though we've had an intense heat wave and pounding sun for weeks on end. Thanks so much pool doc! We also have not had to keep changing the DE in the filter. Still using the original and not bumping all the time! It's wonderful!

[aylad]

Glad you're able to enjoy your pool this summer and not spend all your time working on it!!

Janet