Yes, I dumped in 7 gallons of bleach at 8 PM and tested the water shortly after. I finally had a high chlorine reading. At 11 PM I retested and the chlorine was at 0 and ph was at 7.8 or so. This morning I tested the water, and chlorine was still 0 but ph had dropped to 7.2.
My plan is to put 7 more gallons in tonight at 7 PM, and then re-test at 11 PM to see if it held or not. If it dropped again, I will reapply 7 more gallons of bleach. I am trying to break this ammonia or bacterial trap I am in. I was just wondering about this ph drop I had and how I should handle it in the middle of this trap I am in.
At 7:30 PM I added 6 gallons of bleach, chlorine readings were very high. I have retested every half hour since then and the chlorine seems to be holding. The ph however is dropping. It is at 6.8 now at 9:45 PM. Should I address this or should I just stay the course and keep the pool in shock mode?
Last edited by PoolDoc; 05-27-2012 at 04:12 PM.
Reason: merging multiple posts
16'x32' oval 15K gal IG vinyl pool; liquid chlorine; Hayward cartridge filter; Hayward 3/4 hp pump; 3/5/2012hrs; Taylor 2006c; utility water; summer: none; winter: vinyl / water bags; ; PF:8
Bookmarks