Hello again!

Okay, my K-2006 kit is on it's way. I filled up the pool on the 21st, measured on the 22nd the CL @2 and PH @ 7.5 with my hth 3-way kit.

Wasn't able to tend to the pool because of work on the 23rd. Today, the 24th, it measures out at CL @.5 and PH @ 7.5 still.

Digging through some of the recent posts, it was mentioned to start adding a gal of bleach per 10,000 gals of water every night. Would a gallon today, and a half gallon in the following evenings, be okay until I get the full kit in?

I picked up at Wally World a 4lb bag of hth Salt pool care (cyanic acid). The levels it recommends are 4 lbs for 20,000 gallons. Would it be worth adding a pound of it now to help keep the CL or should I wait until I get the 2006?

Also, I've not added any salt to the pool just yet, was wanting to see if I can get this going well and use the SWCG to maintain the CL levels, much like Bob E. is doing above. Very hot and sunny here in Texas.