To continue the above, tests this morning yielded (still waiting on the FAS-DPD K-2000):

CL- >10 ppm
pH >8.2 (acid drop 15 drops to get to ~7.6)
TA 120-130 ppm

Left as is and headed to work. Tests this evening:

Water blue, but cloudy
Cl- non-detectable (no stabilizer, all day sun, oxidation)
pH >8.2 (acid drop ~ 5 drops to get to 7.6)
TA 150 ppm
NaCl 4200 ppm (ideal is 3500, 3000 is too low, so I'm not going to feed and bleed at this time)

Added 3 cups HCl

Will add ~5 gallons of bleach before bed

Questions:
1) Why is pH still high - from day one? (neighbor's pH has always been low - same water)

2) Based on above recommendation (no green), will it be ok to add CYA tomorrow?

3) Any additional suggestions?