+ Reply to Thread
Results 1 to 4 of 4

Thread: New to forum

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: New to forum

    Welcome to Pool Forum!
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: New to forum

    Hi Ciaran;

    What we are moving toward recommending generally is that pools NOT be started up with SWCGs. There are several reasons for this.

    First, life of an SWCG is a function of cell ON-time; the longer they run each day, the sooner the cell dies. SWCGs are NOT sized to handle the humongous chlorine demand of a newly opened pool, much less a green pool. What SWCGs do well, is meet routine demand, but when things go wrong, it's better to turn them off, and handle things manually.

    Second, the problems pool owners often have with SWCGs result from the units being 'over-sold'. They will NOT eliminate all problems; they will not keep pool owners from having to deal with pool chemistry. They CAN make it easier . . . but ONLY if the pool owner takes care of the pool and the water. A pool owner who can't run a pool without an SWCG is usually not going to have a good experience WITH a SWCG!

    So to get the most out of your SWCG -- if it's working! -- you need to learn to operate your pool successfully without an SWCG!

    Do this:

    1. Read the test kit info page linked in my signature.
    2. Get a K-1000 -or- a local OTO kit. If the HTH 6-way is available at Walmarts in your area, that's an excellent option.
    3. Get a K-2006. (Even if you get the 6 way, you'll still need the calcium test in the K2006)
    4. Decide how ELSE you want to chlorinate your pool, but for now, use bleach each evening at the rate of 1 gallon of PLAIN 6% bleach per 10,000 gallons.
    5. Post your pool info -- gallons, pool type & dimensions, equipment make and model, etc. -- in your signature (link in my sig)
    6. Tell us what your pool's CURRENT condition is.

    . . . and we'll go from there.

+ Reply to Thread

Similar Threads

  1. New to forum
    By sjones2011 in forum General Interest
    Replies: 2
    Last Post: 08-13-2012, 03:22 PM
  2. New to the forum
    By DanMan in forum Above-Ground Pool Construction & Repair
    Replies: 8
    Last Post: 07-22-2012, 10:42 PM
  3. New to Forum
    By jmajtyka in forum General Interest
    Replies: 2
    Last Post: 07-20-2012, 07:35 PM
  4. New to this forum
    By NomDePlume in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-25-2012, 11:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts