Well, I guess my IMG code will not allow me to post images.... Whats the secret handshake
Re: Bubbles in return lines
Well, I guess my IMG code will not allow me to post images.... Whats the secret handshake
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Re: Bubbles in return lines
Email your pics to the site admin at: poolforum@gmail.com along with a link to this thread: http://www.poolforum.com/pf2/showthr...n-return-lines and PoolDoc will post them for you. Send the highest res photo you have and he'll crop 'em up for you if necessary.Originally Posted by Phillbo
Well, I guess my IMG code will not allow me to post images.... Whats the secret handshake
Don't you just love how I volunteered someone else's services?
rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10
Re: Bubbles in return lines
email sent ... I told him to send you the bill
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Re: Bubbles in return lines
So, how long can a pump run dry before it destroys its self?
My timer comes on at 7 am and I would assume it would only take about 10-15 minutes to pump it down to the point that the skimmer was dry and start sucking air so it could have run dry for an hour.
What symptoms would it display that there has been damage done (other than the obvious bearing noises etc...) ?
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Re: Bubbles in return lines
Rebuild kit just showed up on the Big Brown Truck... Slapped it together and installed. I'm generating chlorine again, the bubbles are gone (only ran for a few minutes, will confirm when the run cycle kicks in tomorrow) and the pump appears to be undamaged.
I still think I need to mount the cell vertical so if we can get the pics up, I'll look for opinions on adding the number of 90* angles it would take to do so... I'm thinking 4.
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Re: Bubbles in return lines
Your pictures (sorry, but we've been slammed for the past 4 days!)
PoolDoc / Ben
Posting Permissions
Reply With Quote
Bookmarks