my FC is down to 2.5 ppm tonight. Should I still only add 2 gallons? Or should I try to bring it up to 10ppm?
my FC is down to 2.5 ppm tonight. Should I still only add 2 gallons? Or should I try to bring it up to 10ppm?
~Holly
27ft 16K gal round AGP --Hayward sand filter -- Pump- 1 1/2hp A.O Smith Using BBB method --- Taylor K-2006 -- PF=> 7.5
2 gallons should be fine, with stabilizer as low as you have. But, 3 won't hurt.
Ok...I've been MIA for a bit now...pool looks GREAT! But...my PH is down to 7.0. How much borax will I need to raise that up to 7.6-7.8 ? I've put one box in tonight already...but I have 3 more on stand by. Should I just put one box in per night till I get the levels up were they need to be?
Oh...and should I start adding my stabilizer now? How much is normal for stabilizer? I'm printing this page after all this so that I know what to do next year after opening![]()
~Holly
27ft 16K gal round AGP --Hayward sand filter -- Pump- 1 1/2hp A.O Smith Using BBB method --- Taylor K-2006 -- PF=> 7.5
Yes, that's by FAR the best way to adjust pH! If your pH is in the danger zone (>8.2 or <6.8) you can use the acid / base demand test in the K2006 to measure (not: calculate) a near exact dose. But, if you are in the safe zone (and you are) adjusting a little at a time is by far the best way to adjust pH.
PoolDoc / Ben
Bookmarks