400 cya

[PoolDoc]

Yes, please, and pH and chlorine.

Given that you already suspect a CYA > 200 ppm, may I suggest you test a diluted sample, like this:

1. Collect 1/2 cup of pool water
2. Add 1/2 cup of tap water & mix
3. Fill your CYA sample bottle to the first line.
4. Add your CYA reagent & mix
5. Wait 60 seconds, and mix again
6. Wait 30 seconds
7. Hold the sample tube at waste height, outside in good light but not direct sun
8. Add CYA mix to the tube until the dot at the bottom disappears.
9. Read the scale on the side of the tube, corresponding to the sample level inside the tube.
10. Multiply this reading x2 -- that is your CYA result in ppm.

[atkinson40]

Ben, Is there a place on the forum that simplifies the ph and cl tests with the taylor kit? I'm trying to understand the directions and its hurting my brain. Or do I just need to try harder? Thanks Kevin

[Watermom]

See if this helps. If you need more information, let us know.

http://www.taylortechnologies.com/pr..._slideshow.asp

http://www.taylortechnologies.com/Ch...P?ContentID=11

[atkinson40]

Performed the following tests:

1. ph is a little less than 7. Will go to find borax and wait for instructions.

2. Free chlorine test does not turn pink when powder is added. (indicating no free ch?) Will get gallons of bleach. I did not continue on to combined ch test.

3. CYA test per Ben's directions: 7 ml of half diluted pool water. 7ml of reagent. Added this to tube until dot disappears and the level only comes up to about a third of the way to the 100 mark. Multiply this by 2 to get 60. Can I say YIPPIE!!! ??? Maybe my CYA isn't so high after all?? What's up with my pool supply store who gave me a 400 CYA reading? Thanks Kevin

[PoolDoc]

What's up with my pool supply store who gave me a 400 CYA reading?

Once people get their K-2006, more often then not they discover that their pool store's testing was bogus. What people don't realize is that pool stores have a NEGATIVE incentive to provide accurate testing, because ACCURATE testing reduces chemical sales!

=> With at 36K pool at pH less than 7.0, start with 2 boxes (added slowly to the skimmer, pump on), wait 4 hours, and retest.

=> You really, really want to avoid zero chlorine.

[atkinson40]

Added 2 boxes of Borax. Now that I know my pool's not a disaster due to high CYA, what is maintenance chlorine levels? Should I use bleach? How many gallons a week of the %6? Thanks Kevin

[PoolDoc]

There are many ways to do it.

One very easy way is to use trichlor, with a floater or two, to maintain a constant chlorine feed, and bleach to kick it up 1x per week. By using both, your CYA will move upwards pretty slowly.

You know about bleach; here are the other items:

Trichlor tabs: buy at at Sams Club IF you can buy the PoolBrand product in the 40lb bucket OR Kem-Tek 3" Trichlor 35lbs @ Amazon . Do NOT buy from Costco, Walmart or local pool stores - most are selling trichlor blends which can be a real problem. If you find the Kem-Tek brand at Home Depot or Lowes, that's OK. Other brands, you have to learn to read the chemical ingredients section of the labels VERY carefully!

Trichlor floater: This one is typical, and fine - Kem-Tek 879 Pool Floating Tablet Dispenser Pool and Spa Accessories, but if you want to buy that locally, I think most of them are fine. If one DOES spill trichlor tabs in your pool, get them up quickly -- they will often leave a very difficult to remove stain, if left on the pool for hours.