UPDATE:
Finally getting there.... water still cloudy, can see up to about 5 feet deep
FC: 5.5
CC: 1.0
pH 7.2
TA 160
My pH keeps dropping???? I have added box after box of Borax, any thoughts???
UPDATE:
Finally getting there.... water still cloudy, can see up to about 5 feet deep
FC: 5.5
CC: 1.0
pH 7.2
TA 160
My pH keeps dropping???? I have added box after box of Borax, any thoughts???
22K gal IG 18' x 36' Vinyl Pool, 300 lb Sand Filter, Heat Pump, Taylor 2006, 12 mil solar cover,
Don't worry about what your pH is doing right now. Just add borax as needed. Once you have a stable pool -- no algae; no particular chlorine demand -- THEN we can look at lowering your alkalinity, and stabilizing your pH.
But, first things first!
Am I close to being out of this mess with a CC of 1?? I have used about 25# of 3" pucks and too many gal of beach to even count. I have bought all of the local stores out of borax and big bottles of bleach. (They all look at me funny when I come to the store daily for 2 boxes of Borax and 4 bottles of bleach)
Today I had a low FC of .5 and CC of 1 but I put in 5 gal of bleach and now have a FC of 6 and CC of 1.
Recently I have added at least 10 boxes of Borax, but my pH still is at 7-7.2. Water still cloudy.
Thanks for the help.
22K gal IG 18' x 36' Vinyl Pool, 300 lb Sand Filter, Heat Pump, Taylor 2006, 12 mil solar cover,
The way to tell is to look and see what happens overnight. If you have 6 ppm at 7 or 8 PM your time, and still have at least 5 ppm tomorrow morning . . . you are probably close to done.
Still not there. FC still dropping to 2-3 at times. CC still at 1.5 and pH at 7.0 no matter how much borax I throw at it.
22K gal IG 18' x 36' Vinyl Pool, 300 lb Sand Filter, Heat Pump, Taylor 2006, 12 mil solar cover,
Bookmarks