Able to test again:
FC 7.5
CC 2.5
pH 7.0
TA 160
Water still cloudy but clearing up significantly. Shallow end pretty clear but cannot see the bottom in the deep end.
Able to test again:
FC 7.5
CC 2.5
pH 7.0
TA 160
Water still cloudy but clearing up significantly. Shallow end pretty clear but cannot see the bottom in the deep end.
Keep hammering it with bleach.
Away for two days (still pucks in the skimmer) and retested:
FC 5.0
CC 2.5
pH 7.2
Added 4 gal of bleach and pucks to the skimmer. Hope this changes soon, I hate my pool!!!. Water still cloudy but slowly improving.
Last edited by Watermom; 05-14-2012 at 07:40 PM. Reason: fix a typo
Pools are easy . . . but only if you don't let them get messed up. Everybody does, sooner or later. But, use this to encourage yourself to avoid such problems in the future: avoiding is MUCH easier than fixing!
I haven't checked your pool volume (can you put your pool info in YOUR signature? the link is in MY signature), but it looks like you might want to add some borax.
Last edited by PoolDoc; 06-01-2012 at 10:07 PM. Reason: de-sig
I have added 4 boxes of Borax over the last week and the pool has stayed between 7.0 and 7.2.
My pool is 22,000 gal 18 x 36 in ground
22K gal IG 18' x 36' Vinyl Pool, 300 lb Sand Filter, Heat Pump, Taylor 2006, 12 mil solar cover,
UPDATE:
Finally getting there.... water still cloudy, can see up to about 5 feet deep
FC: 5.5
CC: 1.0
pH 7.2
TA 160
My pH keeps dropping???? I have added box after box of Borax, any thoughts???
22K gal IG 18' x 36' Vinyl Pool, 300 lb Sand Filter, Heat Pump, Taylor 2006, 12 mil solar cover,
Don't worry about what your pH is doing right now. Just add borax as needed. Once you have a stable pool -- no algae; no particular chlorine demand -- THEN we can look at lowering your alkalinity, and stabilizing your pH.
But, first things first!
Bookmarks