Re: Pool Opening Problems.
Today's numbers:
FC = ~5 with OTO.
pH = 7.5 I've been bringing pH up slowly.
I didn't test for anything else since those numbers don't seem to fluctuate much. I test them about 1-2 times per week.
Pool water is SLOWLY getting clear. I can just barely see the bottom of the pool in the shallow end. Water color itself looks great. The pool seems to be holding chlorine, I'm not adding much if any. I did add some water today so I'll need to re-check the numbers probably tomorrow.
Two speed timers installed and running great. the motor is really quiet on low speed.
~18K gal IG Gunite -- 1-HP Pentair Whisper Flo with new 2-speed motor. Intermatic T1000 Dual Speed Timer -- Tagelus 60D sand filter
Hayward SWCG (up to 40K gal.) -- Polaris 280 and booster pump -- Rainbow (now Pentair) in-line chlorine Feeder.
Bookmarks