I have a 26,000 gallon in-ground salt water pool. The pool is about a year old. The Hayward Goldline controller is reading my salt levels at 2600ppm. I had my water tested yesterday and everything looked good except there is a big difference in the ppm levels. My water test shows that my pool is at 3100ppm. Which one is correct? I was about to add some salt to the pool before the test and now I am not sure.


Since it was time to do so, I cleaned my SWG and pulled my DE Filter out and cleaned that as well. After cleaning everything my pool is still reading 2600 ppm. Is there anyway to reset the controller and have it take a new salt level reading? Any assistance would be appreciated.

Thanks,
Chris